Attach the 1mm thick planks to the hull, then cut the extra part, polish the surface, and paint it at last. It seems not bad, this is the first time sampling, later we will do the second time, make some improvements for the hull.
Attach the 1mm thick planks to the hull, then cut the extra part, polish the surface, and paint it at last. It seems not bad, this is the first time sampling, later we will do the second time, make some improvements for the hull.
It seems not bad, this is the first time sampling, later we will do the second time, make some improvements for the hull.
It is not good to make the deck with 0.5mm walnut planks, you are suggested to change into 1mm walnut planks, and polish them after being assembled. There is no need to make the opening of the cannon on side board too polished, as shown in the picture is the bump edge of the cannon opening , it looks better.
1mm walnut planks
Buyer shows of the black pearl
POTC (AWE) - The Return of the Dutchman Part 1
Reprinted bermudagirl50 in youtube,Thank for bermudagirl50
POTC (AWE) - The Return of the Dutchman Part 2
I am working.
This is the straw made by wood dust, do you think it is OK?
Original drawings
How to polishing hull,Please click here
link text one Video in here,Please click here
There is something wrong with the railings on the top of the ship side, so we do some adjustments, which are circled out by red mark line. Fortunely, they will never affect the look of the whole ship.
To be continue...
The carving parts on the front of the ship are 3D printed, we put the whole carving part onto the ship like a cover, and this is the best idea we can figure out now.
After we tried many times, we make a decision on the final choice of colors which is shown in the picture.
The final decision
Attach the 10 faces to the side surface of the ship model, then you can make some adjustments to make them look better.
Please use oily mud onto the carving parts, in order to make them match with the ship model better.
Paint black